[]
巴巴客标准规范
热点: 行业标准 | 澳大利亚 | 电工 | 日本工业 | 国家军用 | 机械 | JB | 车辆 | 工程建设 | SAE |
    站内 资讯下载问吧

IEC 61010-1-2010 测量、控制和实验室用电气设备的安全要求 第1部分 一般要求

巴巴客网络 发布: 来源: 时间:2011-09-05 20:35:16

授权形式:免费版2010目录标准
更新时间:2011-09-05 20:35:16
标准语言:简体中文.PDF
标准平台:Win2000/WinXP/Win2003
标准类别:国外标准
标准大小:未知
标准下载:

标准介绍:

标准编号:  IEC 61010-1-2010
中文标准名称:  测量、控制和实验室用电气设备的安全要求.第1部分:一般要求
代替标准号:  IEC 61010-1-2001 测量、控制和实验室用电气设备的安全要求 第1部分:一般要求,
标准简介:
  IEC 61010-1:2010 SPECIFIES GENERAL SAFETY REQUIREMENTS FOR THE FOLLOWING TYPES OF ELECTRICAL EQUIPMENT AND THEIR ACCESSORIES, WHEREVER THEY ARE INTENDED TO BE USED.A) ELECTRICAL TEST AND MEASUREMENT EQUIPMENTB) ELECTRICAL INDUSTRIAL PROCESS-CONTROL EQUIPMENT C) ELECTRICAL LABORATORY EQUIPMENTTHIS THIRD EDITION CANCELS AND REPLACES THE SECOND EDITION PUBLISHED IN 2001. IT CONSTITUTES A TECHNICAL REVISION. THIS EDITION INCLUDES THE FOLLOWING SIGNIFICANT CHANGES FROM THE SECOND EDITION, AS WELL AS NUMEROUS OTHER CHANGES.- THE SCOPE OF THE STANDARD HAS BEEN EXPANDED TO INCLUDE ALL LOCATIONS WHERE THESE PRODUCTS MAY BE USED, SO THAT BOTH PROFESSIONAL AND NON-PROFESSIONAL VERSIONS OF THESE PRODUCTS ARE WITHIN THE SCOPE.- THE REQUIREMENTS FOR TESTING AND MEASURING CIRCUITS (IN VARIOUS SUBCLAUSES AND THE ENTIRETY OF CLAUSE 16) HAVE BEEN REMOVED AND INCLUDED IN A PARTICULAR STANDARD IEC 61010-2-030.- INSULATION REQUIREMENTS (6.7) HAVE BEEN COMPLETELY REWRITTEN.- ADDITIONAL REQUIREMENTS FOR PROTECTION AGAINST MECHANICAL HAZARDS (CLAUSE 7) HAVE BEEN INCLUDED.- SURFACE TEMPERATURE LIMITS (CLAUSE 10) HAVE BEEN MODIFIED TO CONFORM TO THE LIMITS OF EN 563.- RADIATION REQUIREMENTS (CLAUSE 12) HAVE BEEN MODIFIED, AND TAKE INTO ACCOUNT A DISTINCTION BETWEEN INTENDED EMISSION AND UNINTENDED EMISSION.- REQUIREMENTS FOR REASONABLY FORESEEABLE MISUSE AND ERGONOMIC ASPECTS HAVE BEEN ADDED (CLAUSE 16).- A NEW CLAUSE (CLAUSE 17) HAS BEEN ADDED TO DEAL WITH HAZARDS AND ENVIRONMENTS NOT COVERED BY THE STANDARD, ALONG WITH A NEW INFORMATIVE ANNEX (ANNEX J) DEALING WITH RISK ASSESSMENT.- A NEW INFORMATIVE ANNEX (ANNEX E) ADDRESSES METHODS OF REDUCING THE POLLUTION DEGREE OF A MICRO-ENVIRONMENT.- REQUIREMENTS FOR THE QUALIFICATION OF COATINGS FOR PROTECTION AGAINST POLLUTION HAVE BEEN ADDED (ANNEX H).- A NEW INFORMATIVE ANNEX (ANNEX I) HAS BEEN ADDED TO FURTHER EXPLAIN HOW TO DETERMINE THE WORKING VOLTAGE OF A MAINS CIRCUIT.IT HAS THE STATUS OF A GROUP SAFETY PUBLICATION, AS SPECIFIED IN IEC GUIDE 104.
标准状态:  
:  2011-4-15
发布日期:  2010-06-10
实施日期:  2010-06-10
英文标准名称:  safety requirements for electrical equipment for measurement, control, and laboratory use - part 1: general requirements
标准类别:  国际电工委员会标准
标准页数:  326
文件格式:  PDF格式
大小:  89KB

标准下载

标准下载地址:

下载地址

[错误报告] [返回顶部]
关键词:更多关于 测量 实验室 设备 的标准下载
您可以把这个标准分享到:

标准下载栏目

网站首页 | 关于我们 | 联系方式 | 招聘信息 | 版权声明 | 网站地图 | 广告预订
巴巴客网络的网站:公文范本站 | 论文范文站 | 企业管理站 | 行业标准站 | 行业知识站

Copyright © 2010 BABAKE.COM 巴巴客版权所有

网站未经授权禁止复制或建立镜像。
粤ICP备 08011272号